Details

Capacity

8 duplex channels

Sampling Rate

480Hz

Copper Line Interface

RS232 at 9600bps

Input Interface

Buffered and protected, open/closed sensing, contact closure from IN to GND will close alarm receiver N/O.

Input Loop Resistance

External closed loop, 1000Ω max.

Output Interface

Optically isolated MOSFET (80mA @ 200V DC or AC with <35Ω On resistance)

Alarm Interface Connector

25 pin D female subminiature connector

OPTIONAL FIBER VERSION

Optical Wavelength

850 ± 40nm for OSD159F

1310nm ± 40nm for OSD159FL

Transmitter Optical Power

-15 to -12dBm into multimode fiber

-15 to -10dBm into singlemode fiber

Receiver Sensitivity

<-40dBm for 1 x 10-9 BER

Optical Link Budget

>25dB at 850nm (>6km of multimode fiber)

>25dB at 1310nm (>20km of multimode fiber, >50km of singlemode fiber)

Receiver Saturation

>-7dBm

Optical Connectors

ST standard

POWER/CONNECTORS/ENVIRONMENTAL

Indicators

Link Status (Green: Link OK; Red: Link Faulty)

Link Alarm

MOSFET switched to GND on Pin 4 of Terminal Block when link is OK (Rated at <1.0A @ 30VDC)

Copper Line & Alarm Connector

4 Position Terminal Block

Dimensions (mm)

Small module. 110W x 104D x 25H

OR

OSD standard card, 208D x 100W x 25H

Weight

200g (module), 150g (card)

Power Requirements

8 to 40VDC or 15 to 26VAC at 3VA maximum

Power Connector

2 Position Terminal Block

Operating Temperature

-20 to +75°C

Relative Humidity

0 to 95% non-condensing

Chassis Current Consumption (CCC)

0.25 Amp

Additional Information