• 48x 10/100/1000BAse-T PoE + 2x 10G Gigabit SFP+
• 400W Current Sharing PoE
• IEEE 802.3at PoE, bis zu 30W pro Port
• Layer 2 + Full Management Software Features
• 4K VLAN, 8 queues QoS, Advanced VLANs
• MSTP, LLDP, SFLow, 802.1X, TACAS+, ACL
• IPv4/v6 dual protocol

Introduction
The switch is 48-port 10/100/1000Base-T + 2 10 Gigabit SFP+ Ports Rack-mount L2+ Full Management Network Switch that is designed for medium or large network environment to strengthen its network connection. The switch supports 136G non-blocking switch fabric, the 48 gigabit ports and 2 10G uplink ports can transmit and receive data traffic without any lost. The EEE feature reduces the power consumption when there is no traffic forwarding even port is still connected. The switch also supports Layer 2+ full management software features. These features are powerful to provide network control, management, monitor and security feature requests. Including rack-mount brackets, the 19“ size  fits into your rack environment. It is a superb choice to boost your network with better performance and efficiency.

Current Sharing PoE
ALL-SG8926PM equipped with Current Sharing technology to support maximum 500W power consumption for PoE power. There are 2 power modules inside, they work together to provide 500W PoE power to the front 24 PSE ports. Once one of the power modules is failure, the other power module can backup and continuously deliver 250W PoE power. Once the PD clients request higher than 250W power, the user can configure the priority value for the PSE ports, the switch delivers power to the higher priority ports first.

2x 10G Gigabit SFP+ Open Slots
The switch equips with 2 10G SFP+ open slots as the uplink ports, the 10G uplink design provides an excellent solution for expanding your network from 1G to 10G. By 10G speed, this product provides high  flexibility and high bandwidth connectivity to another 10G switch or the Servers, Workstations and other attached devices which support 10G interfaces. The user can also aggregate the 10G ports as Trunk group to enlarge the bandwidth.

Full Layer 2+ Management Features
The switch includes full Layer 2+ Management features. The software set includes up to 4K 802.1Q VLAN and advanced Protocol VLAN, Private VLAN, MVR…features. There are 8 physical queues Quality of Service, IPv4/v6 Multicast filtering, Rapid Spanning Tree protocol to avoid network loop, Multiple Spanning Tree Protocol to integrate VLAN and Spanning Tree, LACP, LLDP; sFlow, port mirroring, cable diagnostic and advanced Network Security features. It also provides Console CLI for out of band management and SNMP, Web GUI for in band Management.

Advanced Security
The switch supports advanced security features. For switch management, there are secured HTTPS and SSH, the login password, configuration packets are secured. The port binding allows to bind specific MAC address to the port, only the MAC has the privilege to access the network. The 802.1X port based Access Control, every user should be authorized first when they want to access the network. AAA is the short of the Authentication, Authorization and Accounting with RADIUS, TACAS+ server. Layer 2+ Access Control List allows user to define the access privilege based on IP, MAC, Port number, and etc.