Fibre Optic Solutions

• • One way optic transmission of PAL, NTSC or SECAM video plus duplex transmission of one data channel and forward transmission of a contact closure.
• • Broadcast quality 10 bit video maintained over all link lengths
• • Video bandwidth of 6MHz
• • Single fiber operation
• • Receiver available either as a single channel card (OSD8826R) or module (OSD8826RC) or as a dual channel card (OSD8826R2).
• • Extremely cost effective
• • Remote control of Pan, Tilt and Zoom for video surveillance.
• • Operating range of at least 5km on multimode and 40km on singlemode fiber, with longer distances possible using optional optical devices.
• • Standard operation using multimode or singlemode fiber; no need to specify fiber type.

• • Security and fire panel monitoring
• • Simple remote control systems
• • Transmission of open/closed contacts
• • Enables up to 8 alarm conditions to be transferred several kilometres via a single optical fiber
• • Immune to electrical interference
• • Complete end-to-end isolation
• • Small, robust and reliable

• • Enables up to 8 duplex alarm conditions to be transferred via one RS232/TTL data channel
• • Both card or standalone module versions are available
• • Available as either a fiber optic modem or as an RS232 based copper modem
• • RS232 version can work with any OSD fiber optic modem which has at least one spare data transmission channel
• • Complete end-to-end isolation either a a fiber optic unit or as an RS232 link working in conjunction with other OSD fiber modems

• • Interfaces with any touchtone or decadic dialling telephone and PABX systems.
• • Available with 1 or 4 telephone interfaces.
• • Duplex communication utilising 100Base-Fx SFP transceivers that can be selected according to specific length or fiber requirements without changing the whole unit.
• • Operates with both singlemode and multimode fibers over up to 50km
• • Available in both standalone module or rack-mount card.
• • Fully digital transmission.
• • Optional relay contact channel
• • A-Tick compliant

• • Supports 4 full duplex audio and data channels
• • Data can be RS232 or RS422 on all four channels with one channel also RS485 capable
• • User settable turnaround delay on RS485 channel
• • Broadcast quality 18 bit digital audio transmission
• • Available as a card or as a sturdy standalone module

• • Multi-protocol operation
• • 2 and 4-wire RS485, TTL, RS422, Manchester, Biphase or RS232 operation
• • Extends link lengths to 5km on multimode and over 100km on singlemode fiber
• • Full duplex, asynchronous, DC to 1Mbps
• • Plugs directly into the OSD370 standard chassis
• • ST optical connectors standard
• • Safe transmission in hazardous environments
• • More secure than copper cables
• • Robust and reliable

• • Full duplex synchronous or asynchronous data transmission at up to 20kbps
• • Small EMI/RFI resistant metal enclosure plugs onto the back of the computer or terminal
• • Safe transmission in hazardous environments
• • More secure than copper cables
• • Small size, low cost, robust and reliable
• • Can be used as a 4-channel RS232 multiplexer
• • No user adjustments

• •
  Uncompressed 9 bit video, 24 bit audio encoding, giving professional quality transmission
• • Fiber optic transmission of four or eight video signals on one fiber with four RS232 and RS422 data signals (two of each) which may be one way with the video or, optionally, full duplex
• • Optional transmission of four audio and/or four additional high speed data channels which may be one way or full duplex. Alternatively, the user may transmit eight audio or eight extra data signals, again either one way or full duplex
• • Range of up to 160km is possible with optional 1550nm operation and high sensitivity optical receiver
• • Available with dual SFP transceivers for redundant optical link operatio
• • Optional duplex operation over one fiber
• • Optional 10/100 Base-T Ethernet bridging through the link
• • Optional duplex contact closure channels
• • Operates over singlemode fiber. Very short distance operation over multimode fiber is possible: contact OSD for details
• • Video bandwidth of 6 MHz, SNR >63dB
• • Audio bandwidth of 15kHz, SNR >100dB
• • Video inputs have 3dB overload capability

• • Uncompressed 9 bit video encoding, giving professional quality transmission
• • Fiber optic transmission of four video signals on one fiber with one RS232, one RS422/RS485 data signals and one contact closure
• • Optional 10/100 Base-T Ethernet bridging through the link
• • Video bandwidth of 6.5MHz, SNR >63dB
• • Communication utilising standard 1000Base-X SFP transceivers that can be selected according to specific length or fiber requirements without changing the whole unit.
• • 2-fiber 1310nm or 1-fiber 1310nm/1550nm SFPs available for multimode or singlemode fiber
• • 2-fiber 850nm SFP available for OM2, OM3 and OM4 multimode fiber
• • SFP module(s) sold separately

• • 3 video transmitters/card (OSD551)
• • 3 video receivers/card (OSD553)
• • Bandwidth of 10MHz
• • Extends wideband video transmission to over 4km
• • Higher quality video than with coax or twisted pair
• • Immune to electrical interference
• • Complete end-to-end isolation
• • Safe transmission in hazardous environments
• • More secure than coaxial cable
• • Provides many channels of transmission and/or reception in a compact 19" rack mounting configuration
• • Compatible with most other OSD300 series video transmission products

• • Extremely cost effective
• • Bandwidth of 10MHz
• • Extends wideband video transmission to over 3km
• • Immune to electrical interference
• • Eliminates length dependant adjustments often required with coax or Cat 5 based systems
• • Completely compatible with OSD300 series receivers
• • More secure than coaxial cable
• • Fits directly onto the camera

• • One way optic transmission of PAL, NTSC or SECAM video plus duplex transmission of one data channel and forward path transmission of a contact closure.
• • Broadcast quality 10 bit video maintained over all link lengths.
• • Video bandwidth of 8MHz.
• • Transmitter data interface configuration controlled by receiver.
• • Single fiber operation.
• • Transmitter is a very compact design that fits into most camera housings.
• • Receiver available either as a single channel card (OSD8817R) or module (OSD8817RC) or as a dual channel card (OSD8817R2).
• • Optional network monitoring available.
• • Operates over either up to 3km of multimode fiber or up to 80km of singlemode fiber, depending on optical devices used.
• • Two optional one way audio channels.

• • Complies with the IEEE 802.3 standard.
• • Supports network traffic of 10 or 100Mbps.
• • Automatic TP setup: no need for crossover cables.
• • Auto-sensing of half or full duplex operation.
• • Automatic setup for 10 or 100Mbps on copper side.
• • Available for singlemode and multimode operation over a variety of link budgets.
• • Available for operation over 1 or 2 fibers.
• • Powered by non critical 12VDC, 24VAC supplies or optional -48VDC supplies.
• • Operates over the temperature range of -20 to +75°C.

• •
  3 video receivers built on one card
• • Broadcast quality 10 bit video, bandwidth of 10MHz
• • Works with the OSD8810 and OSD8815T over an operating range of at least 3km on multimode, 30km on singlemode with greater than 100km possible on singlemode with optional optical devices
• • Performance is maintained at the same high quality over all link lengths
• • Adjustment-free receiver operation
• • Provide many channels of video reception in a compact 19” rack mounting configuration (usually in control room)

• • Bandwidth of 10MHz
• • Operating range of at least 3km on multimode, 30km on singlemode with greater than 100km possible on singlemode with optional optical devices
• • Performance is maintained at the same high quality over all link lengths
• • Adjustment-free receiver operation
• • Small size, low cost, robust and reliable
• • Broadcast quality 10 bit video
• • Two high quality audio channels are optionally available
• • Available as a small standalone module or as a card which plugs into the OSD350 or OSD370 chassis

• • Extremely cost effective
• • Extends wideband video transmission to over 3km of multimode fiber and at least 30km of singlemode fiber with 100km optionally possible
• • Performance is maintained at the same quality over all link lengths
• • Plugs directly onto the camera
• • Eliminates length dependant adjustments often required with coax or Cat 5 based systems
• • More secure than coaxial or Cat 5 cable
• • Broadcast quality true 10 bit video with 10MHz bandwidth
• • Operates with the OSD8815R and OSD8865 digital receivers
• • Two high quality audio channels are optionally available

General
L2 managed Ethernet switch
Up to 16 units stacking for ring or chain topology, shortest path forwarding, and master re-elect performance
User-friendly web browser based GUI
CLI and SNMP management

Port Control
Port speed, duplex mode, and flow control
Port status -- link monitoring
Port statistics -- MIB counters
Port cable diagnostics
 
QoS
Traffic classes (1, 2, or 4, 8 active priorities)
Port default priority and user assigned priority
Scheduler priority
QoS control
Storm control
 
L2 Switching
IEEE 802.1D Bridge with auto MAC learning/aging
IEEE 802.1Q static VLAN
Private VLAN (static)
Port isolation (static)
IEEE 802.1Q-2005–Rapid spanning tree (RSTP)
IEEE 802.3ad Link aggregation, static and LACP
DHCP client
Port mirroring
 
Security
Port-based 802.1X
Web and CLI authentication and authorization
 
Multicasting
IGMP Snooping (IGMPv2, IGMPv3)
Multicast Listener Discovery (MLD) v1 and v2
 
Power Saving
Ethernet energy efficient
– Link down power savings
– Scales power based on cable length
Thermal protection
 
Stacking
Up to 16 units for a Ring or Chain Topology
SPOM (single point of management) – One IP address for whole stacking network
Proprietary stacking protocol with shortest path forwarding function
Master re-election
 
Management
Stack IP address
HTTP server
Web with stack management
CLI console port
Management access filtering
System log
Software download through web
SNMPv1/v2c/v3Agent
IEEE 802.1AB-2005 Link Layer Discovery, LLDP
Configuration download or upload
RFC 1213 MIB II
RFC 3621 LLDP-MED power
RFC 3635 Ethernet-like MIB
RFC 4188 Bridge MIB
Private MIB framework
IEEE 802.1 MSTP MIB
IEEE 802.1AB LLDP MIB

• • Complies with IEEE802.3I/802.3u/802.3ab 10/100/1000Base-T, IEEE802.3z 1000Base-LX standards.
• • Supports RSTP/MSTP/STP for Ethernet redundancy IP Multicast Filtering through IGMP Snooping V1, V2 & V3
• • Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
• • IEEE802.1p QoS with four priority queues
• • MAC-based trunking with automatic link fail-over
• • RS-232 console, Telnet, SNMP V1, V2c & V3, RMON, Web Browser, and TFTP Management
• • Full wire-speed forwarding rate
• • Supports IEEE802.1x Security
• • Bandwidth Rate Control
• • Per-port programmable MAC address locking
• • Up to 24 Static Secure MAC addresses per port
• • Port mirroring
• • Supports NTP
• • SFP module sold separately
• • 1000Mbps-Full-duplex, 10/100Mbps-Full/Halfduplex, Auto-Negotiation, Auto-MDI/MDIX
• • Operates over the temperature range of -10 to +60ºC

• • Complies with IEEE802.3i/802.3u 10/100Base-T, IEEE802.3z 1000Base-LX standards.
• • Supports RSTP/MSTP/STP for Ethernet redundancy IP Multicast Filtering through IGMP Snooping V1, V2 & V3
• • Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
• • IEEE802.1p QoS with four priority queues
• • MAC-based trunking with automatic link fail-over
• • RS-232 console, Telnet, SNMP V1, V2c & V3, RMON, Web Browser, and TFTP Management
• • Full wire-speed forwarding rate
• • Supports IEEE802.1x Security
• • Bandwidth Rate Control
• • Per-port programmable MAC address locking
• • Up to 24 Static Secure MAC addresses per port
• • Port mirroring
• • Supports NTP
• • SFP module sold separately
• • 1000Mbps-Full-duplex, 10/100Mbps-Full/Halfduplex, Auto-Negotiation, Auto-MDI/MDIX
• • Operates over the temperature range of -40 to +75ºC

• • Complies with IEEE802.3i/802.3u/802.3ab 10/100/1000Base-T, 802.3u 100Base-Fx, IEEE802.3z 1000Base-Lx/Sx standards.
• • Has a total of five ports: two fixed copper ports for 10/100/1000Base-T and three SFP ports which may be either copper or fiber.
• • Supports network traffic of 1000Mbps.
• • Can be used with either singlemode or multimode fiber over a variety of link budgets
• • Available for operation over 1 or 2 fibers.
• • Automatic MDI/MDI-X: no need for crossover cables
• • Auto-Negotiation
• • Powered by non critical 12VDC or 24VAC supplies
• • Operates over the temperature range of -20 to +75ºC
• • SFP modules sold separately　
• • Dual Power Supply Inputs

• • Complies with IEEE802.3i/802.3u/802.3ab 10/100/1000Base-T, IEEE802.3z 1000Base-Lx/Sx standards.
• • Supports network traffic of 100Mbps or 1000Mbps.
• • Has one fixed 10/100/1000BaseT copper port and one SFP port which can be 10/100/1000BaseT, 100Base- Fx or 1000BaseLx/Sx.
• • Automatic TP setup: no need for crossover cables.  
• • Can be used with either singlemode or multimode fiber over a variety of link budgets.
• • Available for operation over 1 or 2 fibers.
• • Powered by non-critical 12VDC supplies.
• • Operates over the temperature range of -20 to +75ºC
• • Advanced features like Link Loss Forwarding to detect the link status of link partners either on the fiber and/or copper port
• • Interoperates with the OSD2151 card or module
• • SFP module sold separately.
• • Supports 10KB jumbo frames

• • Complies with IEEE802.3i/802.3u/802.3ab 10/100/1000Base-T, IEEE802.3z 1000Base-Lx/Sx standards.
• • Supports network traffic of 100Mbps or 1000Mbps.
• • Has one fixed 10/100/1000BaseT copper port and one SFP port which can be 10/100/1000BaseT, 100Base- Fx or 1000BaseLx/Sx.
• • Automatic TP setup: no need for crossover cables.
• • Can be used with either singlemode or multimode fiber over a variety of link budgets.
• • Available for operation over 1 or 2 fibers.
• • Powered by non-critical 12VDC supplies.  
• • Operates over the temperature range of -20 to +75ºC  
• • Advanced features like Link Loss Forwarding to detect the link status of link partners either on the fiber and/or copper port
• • SFP module sold separately.

• • Complies with the IEEE 802.3 standard.
• • Supports up to 4 copper ports each of which can have network traffic of 10 or 100Mbps.
• • Automatic TP setup: no need for crossover cables.
• • Auto-sensing of half or full duplex operation.
• • Automatic setup for 10 or 100Mbps on copper side.
• • Available for singlemode, multimode operation over a variety of link budgets
• • Available for operation over 1 or 2 fibers.
• • Powered by non critical 12VDC supplies
• • Operates over the temperature range of -20 to +75°C