Audio video data

OSD158T/OSD158R ALARM TRANSMISSION SYSTEM

FEATURES AND BENEFITS

  • Complies with IEEE802.3i/802.3u/802.3ab 10/100/1000Base-T and IEEE802.3z 1000Base- Lx/Sx standards

  • Has a total of six ports: four fixed copper ports for 10/100/1000Base-T and two SFP ports for the fibre ring or non-ring (100Base-Fx or 1000Base-X)

  • A network diameter of hundreds of kilometers is practical

  • Ring reconfiguration in the case of cable or switch failures takes less than two milliseconds per hop

  • MDI/MDIX Crossover: no need for crossover cables

  • Can be used with either 1 or 2 singlemode or multimode fiber over a variety of link budgets via plug in SFP module (sold separately)

  • Auto-Negotiation for half or full duplex operation

  • Supports 10KB jumbo frames

  • Powered by non-critical 10 to 36VDC or 24VAC supplies with dual power supply inputs

  • Integrates with third party NMS system via industry standard SNMP v1, v2c, v3

  • Supports VLAN and IGMP v1, v2, v3 snooping

  • Port security guaranteed with MAC binding function

  • Operates over the temperature range of -40 to +75oC

  • Web browser GUI included

  • Compatible with all OSD22XX series of redundant ring Gigabit Ethernet switches

  • Available for operation in ring, bus or point-to-point configuration

  • DIN rail or surface mounting

    • INTRODUCTION

    The OSD2254E is a 6-port lite managed industrial ethernet switch with four Gigabit RJ45 and two Gigabit SFP uplink ports which can be used as standard ports or as a redundant fiber ring using OSD’s proprietary ring protocol. Along with higher level features including SNMPVLAN and IGMP snooping the OSD2254E is suitable for use in critical networks. A rugged IP30 casing, fan-less design and wide operating temperature range from -40 to +75oC make it suitable for use in a wide range of harsh industrial environments.

    TYPICAL SYSTEM DESIGN

    ORDERING INFORMATION

    OSD2254E

  • Lite managed 4 x 10/100/1000BaseT + 2 x SFP Gigabit Ethernet Switch

    OSD2254EP

  • Lite managed industrial 6-port Redundant Ring Gigabit Ethernet Switch with up to 60W

  • PoE on each RJ45 port. See datasheet 1022254P**)

    SFP

  • See OSD SFP datasheets #102100XX and #10210000X

    • specifications

    Hardware

    Ethernet

  • 2 x 10/100/1000Base-T RJ45, IEEE802.3i/802.3u/802.3ab
    • Ethernet

  • 4 x 10/100/1000Base-T RJ45, IEEE802.3i/802.3u/802.3ab

    Data Rate

  • 10, 100, 1000Mbps with energy detect, auto negotiate, auto MDIX

    Jumbo Frame Support

  • 10KB

    SFP

  • 2 x Gigabit SFP ports (100Mbps or 1000Mbps user selectable)

    Optical Data Interface

  • IEEE802.3z 1000Base-Lx/Sx, IEEE802.3u 100Base-Fx

    Enclosure Protection Class

  • IP30

    Installation

  • DIN rail, wall mount or desktop

    Alarm (ring version only)

  • Ring to Bus, High Temperature

    Alarm Interface

  • Opto isolated MOSFET rated at 100mA @ 46V maximum

    Alarm Connector

  • 4 way 3.5mm terminal block

    DIP Switch

  • 8 way DIP switch for configuration

    Power Requirements

  • +10V to 36VDC or 22 to 28VAC

    Power Connector

  • 4 way 5.08mm terminal block
    • Indicators

  • 4 x Copper Link on each RJ45

  • 4 x Copper Activity on each RJ45

  • 2 x SFP Speed/Activity/Link on each SFP

  • x Initialise/Ring/Bus

  • 1 x Power/Temperature Alarm
    • Environmental

  • -40 to +75oC

    Relative Humidity

  • 0 to 95% non-condensing

    Dimensions

  • 43W x 91D x 130H mm

    Weight

  • 620g

    • Management

    Interfaces

  • Command Line Interface (CLI mini USB)

  • Web browser based Graphical User Interface (GUI) (Chrome or Edge browser)

  • SNMP v1, v2c, v3
    • Port Configuration

  • Port enable/disable, Auto negotiation

    Port Status

  • Speed, duplex mode, link status, auto negotiation status

    VLAN

  • 802.1Q VLAN

    Multicast Protocol

  • RFC 2236 IGMP snooping v1, v2, v3

    Ethernet Redundancy

  • OSD-Ring
    • SNMP MIBs

  • RFC 1213 MIB

  • Private MIB Framework

  • Contact OSD for full list of available MIB’s

    • WARRENTY

    Warranty Period

  • 5 years

    MTBF (Ground Benign Environment, 30oC)

  • 540,000 hours

    • Request a Quote

    Ready to Work Together? Build a project with us!

    Learn More From

    Frequently Asked Questions

    Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
    Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
    Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.